Your Source for Security Cameras & Other Security Equipment

Hide Security Camera Wires

Hiding Security Camera Wires

If you have chosen a wired security camera system for your home, concealing the wires should be one of your priorities. Dangling and exposed wires are not only unappealing, but give intruders an easy opportunity to disable your security camera system by cutting cables.

Hiding your security camera cables is another way of safeguarding your system. Here are some smart and helpful ways you can keep your cables hidden.

  • Paint the wires.
    Help your cables blend into the environment by stapling the cables to the walls (via staple gun) and painting the wires the same color of your walls. This makes the cables less noticeable from a distance.

A similar alternative would be using a cord cover. If you can find one that matches your walls perfectly, you can eliminate the painting step.

  • Hide wires within baseboards.

The narrow wooden boards that run along the lowest part of the wall are known as the baseboards and can be a helpful ally in concealing your wires. If you have enough doorways in your home, this method can be especially easy.

Remove the baseboards and fish the cables in the gap between the wall and the floor. Make sure the wires are in the proper position before replacing the baseboards.

Aside from the baseboards, you may also hide the security camera wires inside or behind large pieces of furniture (ex. bookshelves, mantels, under the carpet).

Be sure to plan the wiring route first and then fasten the hanging wires with binder clips behind the nearby pieces.

  • Use a plastic tube.
    If you are hiding the cables of your outdoor security cameras, using a plastic tube not only covers the wires, but can also protect the cables from harsh weather conditions and external damages.

    • Because this method involves drilling through studs and threading the tube, you may want to contact an experienced installer.
      Note: Unless you seek professional help, the wires will be almost inaccessible in case of power failure.
  • Run wires through the walls/ceilings.
    If the power source or monitor for your security camera happens to be on the other side of the wall or ceiling, you can take a shortcut by drilling holes in the wall and threading the wires through. The camera, in turn, would be the only visible part.

    • For your own safety and the safety of your equipment, be sure to turn off the power source before you run security camera wires.
    • Begin by drilling holes in the position where the outlet or monitor will be, and use a straightened metal coat hanger to look for any unforeseen obstructions within the wall.
    • Feed the wires through the walls or ceilings to where you need them to go.
  • Install a completely wireless security camera.
    If you don’t want to deal with concealing security camera wires, you can always opt for completely wireless security cameras. Wireless security cameras are powered by batteries or solar-panels and can make the installation process easier. But remember, wireless security cameras are not always wire-free. You may need to run wires to power the plugged-in wireless IP cameras.

If you need help installing your security cameras and hiding the cables, please feel free to contact us at 888-203-6294 or visit SecurityCamExpert.com. It’s our pleasure to help you find the CCTV surveillance system that suits your security needs. You may also connect with us on Facebook, Google+, Twitter, LinkedIn, and Pinterest.

Recent Comments