network security camera

Installation Tips For Your Network IP Security Cameras

Published September 9, 2015 | By admin

These days, network IP security cameras are favored over analog security cameras because they offer more advanced features. Benefits include improved image quality, remote accessibility, and simplified installation and integration.

To gain the full amenities of network IP security cameras (or any security cameras), proper installation and placement is key. Follow these tips to maximize the performance of your network IP camera system.

Installation:

Be sure to match UTP connected devices (ex. couplers, modular plugs, wall plates) to the Category of the cable used and remain consistent throughout installation.
For optimal performance, by design and specification, cable runs in an IP camera system should not exceed 295 feet.
The bend radius for Cat 5e and Cat 6 must be limited to four times the cable diameter, and the acceptable bend radius is no less than 1 inch.
While installing Cat 5e or Cat 6 cable, the pull tension cannot exceed 25 pounds.
Limit the length before stripping the sheath from a cable in a wall box. That way the excess can be easily pushed back into the wall cavity.
Use devices like D rings, bridle rings, and J hooks rather than stapling Cat 5e and Cat 6 cables. This will prevent the risk of altering the outer form or dimensions of the cable.
Maintain a parallel distance of 6-10 inches between Cat 5e and Cat 6 cables and high voltage wires (120/240VAC).
Strip your Cat 5e and Cat 6 cables back as little as possible when attaching them to connecting devices.
Use either the T568A or T568B connection format and stick to that format for the entire installation for consistency.

Positioning:

Consider the environment where you will be installing your IP cameras. Take note of things like lighting and conditions when selecting the appropriate camera.
When considering placement, be aware of the field of view and potential obstructions.
Test the network connectivity in the area where you will place your cameras. Poor connectivity will compromise the camera’s performance.
With all outdoor cameras, especially in areas know for lightning, use surge protection.
Be sure that your PoE power supply is sufficient for your system. Compute your power load and choose the appropriate PoE power supply.
To protect your cameras, use vandal-proof and/or weatherproof housing accordingly.
While Cat 6 UTP is the best choice, Cat 5e should suffice for handling most video transport needs.
Using fiber instead of metallic will allow you to run camera signals at greater distances and with greater bandwidth.
Always use safe installation practices for the safety of yourself and others.

Concerned about doing your own installation? We offer installation services in the Los Angeles, Orange County, Inland Empire, and surrounding areas. Feel free to contact us at 1-888-203-6294 or visit us online at SecurityCamExpert.com. You may also connect with us on Facebook, Google+, Twitter, and Pinterest.

Posted in Network IP Cameras, Security Camera Tips | Tagged network ip cameras, network security camera, security camera installation los angeles, security camera placement tips, security camera tips, surveillance camera installation los angeles

What Are Network IP Cameras?

Published May 6, 2015 | By admin

Sure, you’ve heard of network IP cameras, but do you really know what they are? From the outside, network IP cameras look like your standard security camera. However, network IP cameras are much more than what meets the eye.

IP stands for “Internet Protocol” which is a practice of transmitting data across a network. In the case of network IP cameras, that data is digital surveillance video. These cameras have their own IP addresses so that they can connect directly to a network, allowing them to function in any location with a network connection.

Network IP cameras are connected to a router through an Ethernet cable, which enables two-way communication between the computer and camera. Because the cameras record in digital format, there is no need to convert from analog to digital, allowing for faster transmission. One of the biggest draws of network IP cameras is their capacity to deliver much higher resolution images than analog cameras.

Network IP cameras require Network Video Recorders, or NVRs, to record and store data. NVRs allow you to manage and store your recordings on your computer. Because network IP cameras require lots of bandwidth, other IP technology exists where everything can be processed within the camera itself. Attaching an external hard drive device allows you to store data, while removing the need for an NVR and eliminating bandwidth usage.

Along with the versatility of being installed wherever a network connection is available, these cameras allow live feed access from remote locations. Remote surveillance provides an added sense of security as you can check in on your feed at any time.

If you’re looking for an excellent IP camera, look no further than our Grandstream GXV3672-HD 2MP HD IR IP Camera. For a limited time only, we’re offering this excellent, feature rich IP camera for the low price of $189! This bullet IP camera boasts a 1.2 Megapixel CMOS sensor and HD lens with integrated Power-over-Ethernet (802.3af). With embedded video analytics and SIP/VoIP support, along with support for motion detection and notification on PC client, and a low sale price, this network IP camera is a steal!

For more information on our Grandstream GXV3672-HD 2MP HD IR IP Camera, please contact us at 1-888-203-6294. You may also browse our selection of network IP cameras, NVRs, and more online at SecurityCamExpert.com. Connect with us on Facebook, Google+, Twitter, or Pinterest.

Posted in Network IP Cameras | Tagged best ip security camera, ip security camera, ip security camera system, ip security camera systems, ip security cameras, network security camera, outdoor ip security camera, wireless ip security camera