It’s about time to upgrade your analog cameras to HD-CVI or IP security cameras. By upgrading, you are equipping your home or business with more advanced surveillance solutions. These advanced cameras deliver top quality, with 720p or 1.3 Megapixel and up to 4K resolution. Worried about the compatibility with your current system and the new cameras? Luckily, there are products out there to aid in a smooth transition. And if you have any questions, you can always call SecurityCamExpert.com at 888-203-6294.
Here are some tips to help you ease into a better quality surveillance camera system.
If you are only upgrading a few cameras, hybrid and tribrid DVRs allow you to use new HD cameras with your existing equipment. However, higher resolution cameras will use more disk space.
If you want to maximize your storage space, you may want to consider is decreasing the frames per second at which you are currently recording. For example, if you are recording at 30 frames per second, you may scale that back to 15 frames per second. You will save storage space while still producing quality images.
In addition, if you are currently recording around the clock, you may want to switch it to motion-only. This setting allows your camera to remain in standby mode and only record when motion is detected.
A wireless bridge is used when you want to install a camera in an area where it is impossible to run cables. It can be set up as a transmitter or a receiver. Each camera needs one transmitter, but the receiver can receive signals from multiple transmitters.
But remember, this will only work with network or IP cameras. And for most cameras, you will still need a power source.
You may be hesitant to upgrade because wiring your system can be a costly hassle, however, baluns could be the easy and convenient answer.
Your existing cables depend on the type of security camera system you have. Most IP camera systems use CAT5 or CAT6, while traditional analog systems and HD-CVI systems run on cables more commonly known as Siamese cable (which is coaxial cable along with and 18/2 power wire).
A balun is a type of converter that you put on each end of your existing cable. Depending on the type, it will either allow you to convert CAT5 to an analog signal or use your analog cables with IP cameras.
DDNS (Dynamic Domain Name Service)
For remote access and viewing of your surveillance footage, you need to connect your system to your home or business IP address. Unfortunately, these are usually provided by your internet service provider (ISP) and they will often change this IP address, making it difficult for you to connect to your system.
The DDNS is a personal domain name (ex. “YourLastName.DDNS-service.com”) which will always resolve back to your home IP address regardless of what the IP address is, even after it has changed. Thankfully, a DDNS configuration is built-in most new security recorders, so when your home IP address changes it will contact the DDNS service and update it so that your domain name will always resolve back to your home or business.
If you need helping choosing a new security camera system for your home or business, please feel free to contact us! You can browse our stock online or give us a call to speak with one of our representatives directly. You may also connect with us on Facebook, Twitter, LinkedIn, and Pinterest. Your security is our priority and we are always happy to help.